木工加工棚是施工過程中操作人員或行人的通道，過往人員的加工棚是雙層的。從懸臂式腳手架的懸臂開始，每隔十米設置一個懸臂式加工棚，可以更好地保證人在加工棚下行走的。木工加工棚的安裝和除水平保護裝置之前做法是怎樣的？

The woodworking shed is a passageway for operators or pedestrians during construction. The processing shed for passing personnel is double-layer. Starting from the cantilever of the cantilever scaffold, a cantilever processing shed is set every ten meters, which can better ensure the safety of the witness walking under the processing shed. What was the practice before the installation of woodworking shed and the removal of Horizontal protective devices?

在安裝和拆除水平保護裝置之前，請進行技術交底。高空作業人員經過技術培訓和考試，持證上崗。加工棚所用鋼管、扣件等材料符合JGJ130-2011《建筑用扣件式鋼管腳手架技術規范》及相關標準的要求。水平加工棚安裝、拆卸時，操作人員的“三寶”齊全，使用正確。木工加工棚架設和拆除時，應避免上下同時作業，作業時間要錯開。

Before installing and removing the horizontal protection device, please conduct safety technical disclosure. The personnel working at heights shall receive professional technical training and professional examination and work with certificates. The steel pipes, fasteners and other materials used in the processing shed shall meet the requirements of jgj130-2011 technical code for safety of steel tubular scaffold with couplers for construction and relevant standards. During the installation and disassembly of the horizontal processing shed, the "three safety treasures" of the operators shall be complete and used correctly. During the erection and removal of the woodworking shed, it shall be avoided to operate up and down at the same time, and the operation time shall be staggered.

安裝和拆除加工棚時，所有材料和工具應堆放在距建筑物外緣少2m的地方，堆放高度不應超過1m。拆除的材料應及時運地面并運走，嚴禁高空拋擲。施工和拆除加工棚時，應在地面設置警戒區，并指定專人監控。搭建和拆除加工棚時，應指定專人指導。

When installing and removing the processing shed, all materials and tools shall be stacked at least 2m away from the outer edge of the building, and the stacking height shall not exceed 1m. The removed materials shall be transported to the ground and away in time, and it is strictly prohibited to throw them from high altitude. During the construction and removal of the processing shed, a warning area shall be set on the ground and a special person shall be appointed to monitor it. When setting up and removing the processing shed, a special person shall be appointed for guidance.

管理人員應注意眼睛、腿和嘴，并采取有效的防護措施處理危險情況，確保人員。陰雨大風天氣，應暫停加工棚的架設和拆除，檢查和維護加工棚的質量。加工棚搭建完成后，經專職人員驗收后方可投入使用。水平保護架設和拆除前，應進行技術交底。

Management personnel shall pay attention to eyes, legs and mouth, and take effective safety protection measures to deal with dangerous situations to ensure personnel safety. In rainy and windy weather, the erection and removal of the processing shed shall be suspended, and the quality of the processing shed shall be inspected and maintained. After the construction of the processing shed is completed, it can be put into use after being accepted by full-time safety personnel. Before the erection and removal of horizontal protection, safety technical disclosure shall be conducted.

由此我們了解到，在安裝木工加工棚時，一定要注意施工。施工人員應按施工要求進行施工，同時保證施工質量，達到保護的作用，從而達到我方施工的目的。

From this, we know that we must pay attention to construction safety when installing the woodworking shed. The construction personnel shall carry out the construction according to the construction requirements, ensure the construction quality and achieve the protection effect, so as to achieve the purpose of our construction.

以上就是今天為大家分享的關于問題的相關內容，希望對大家能有所幫助，想要了解更多內容可以電話聯系我們或者關注我們的網站http://practicetypingtests.com。

The above is the relevant content about the problem shared for you today. I hope it can help you. If you want to know more, you can contact us by phone or follow our website http://practicetypingtests.com 。